中华DIY论坛

标题: 3D打印机切片软件Simplify3D 4.1.1 x64及旧版本 [打印本页]

作者: 搬运工A    时间: 2019-3-28 12:04
标题: 3D打印机切片软件Simplify3D 4.1.1 x64及旧版本

3D打印机切片软件Simplify3D 4.1.1 x64及旧版本








对于3D打印机使用者来说,切片软件的使用一定是很频繁的,我们在设计好模型之后,需要经过切片软件进行分层处理,才能拿到3D打印机上进行实际的打印工作,
所以说切片软件是否好用、强大?这对于我们最终打印出来的模型精度等问题,会有极大的影响。今天我们就来介绍一款非常强大的切片软件SimpLify3D,
这款软件对于进阶使用者来说,最为合适不过了!

链接:https://pan.baidu.com/s/1Atc64aiDjhhzk1Wx75nXww
提取码:qicj


Version 4.1.1
•Significantly improved corkscrew printing (vase mode) transitions to create smooth spiraling outlines without any added artifacts
•Improved seam locations for corkscrew printing mode (vase mode) using the start point options defined on the Layer tab
•Improved solid layer placement to create high-quality top solid layers
•Several improvements to the avoid crossing outlines behavior for more efficient travel paths between different areas of the print
•Updated skirt and brim placement so that they stay closer to the model outline for improved adhesion
•Resolved an issue for more consistent retraction sequences when the “perform retraction during wipe movement” option is enabled
•Fixed a bug with retractions when the “force retraction between layers” option was disabled
•Fixed a bug related to support structures of duplicated models
•Fixed a bug that had impacted bridging perimeter placement with some specific models
•Resolved several issues related to single extrusion toolpaths in thin wall regions
•Numerous additional bug fixes and stability improvements

版本4.1.1(GOOGLE 翻译。)
显着改进的开瓶器印刷(花瓶模式)过渡,以创建平滑的螺旋轮廓,而不会增加任何伪影
使用“图层”选项卡上定义的起点选项改进了开瓶器打印模式(花瓶模式)的接缝位置
改进了固体层放置,以创建高质量的顶层实体层
避免交叉的若干改进概述了印刷品的不同区域之间的更有效的行进路径的行为
更新裙边和边缘位置,使其更接近模型轮廓,以提高附着力
解决了启用“在擦除移动期间执行缩回”选项时更一致的缩回序列的问题
修复了禁用“图层间强制缩回”选项时撤消的错误
修复了与重复模型的支持结构相关的错误
修复了一些错误,该错误影响了某些特定模型的桥接周边位置
解决了与薄壁区域中的单个挤出刀具路径相关的几个问题
许多其他错误修复和稳定性改进





作者: chaowei2008    时间: 2021-12-24 11:27
感谢你我的朋友




欢迎光临 中华DIY论坛 (http://zhdiy.org/) Powered by Discuz! X3.2